1. Charge the Device:

   • Before first use, connect the provided USB cable to the device and to a power source (computer, wall adapter, etc.).
   • Charge the device until the indicator light shows it is fully charged (approximately 2 hours).

2. Fill the Water Tank:

   • Fill the BrushyClean tank with warm water up to the "MAX" line.
   • Optionally, add a small amount of gentle brush cleaner for a deeper clean.

1. Attach the Brush:

   • Select the adapter that fits your brush size and securely attach it to the base of your brush.
   • Insert the adapter into the BrushyClean holder.

2. Start the Cleaning Cycle:

   • Gently dip the brush bristles into the water in the tank.
   • Press the power button to start the cleaning cycle. The BrushyClean’s sonic vibrations will effectively remove makeup and impurities.

3. Cleaning Duration:

   • Let the device run for about 10 to 30 seconds, depending on the brush’s dirtiness.
   • Repeat the process if necessary for optimal cleaning.

1. Remove Excess Water:

   • Carefully remove the brush from the adapter and lightly shake it to remove excess water.

2. Use the Drying Tray:

   • Flip over the integrated drying tray and place the brushes upside down for quick drying.
   • Your brush should be dry and ready to use within a few minutes.

Step 4: Device Maintenance

1. Empty and Clean the Tank:

   • After each use, empty the water tank and rinse it with clean water to remove any makeup residue.

2. Clean the Drying Tray and Adapters:

   • Wash them with warm water and mild detergent, then allow them to air dry.

3. Storage:

   • Store your BrushyClean in a dry, clean place. Avoid extreme temperatures.